Sales & Customer Service

Quote Follow Up Email Templates: 9 Examples With Text Versions (2026)

Nine quote follow up email templates, from same day to no response, with subject lines, text versions and timing. They work for estimates too.

By Kenneth12 min read

A good quote follow up email template is short, specific to the job, and easy to answer even when the answer is “not yet.” Send the first note the same day as the quote, follow up two to three days later, again after a week with something useful, then ask politely whether to close the quote. Stop the moment the customer replies.

Below are nine templates you can copy, each with an email version and a short text version. Five make up a sequence for when the customer goes quiet. Four more cover the replies you actually get: a price objection, “let me think about it”, a customer comparing quotes, and a quote about to expire. After that come subject lines, tone, timing, and how to automate the whole thing without it reading like a machine wrote it.

If your business sends estimates rather than quotes, every template here works as an estimate follow up email too. Swap the word and keep the timing.

Why quotes go quiet

It is Thursday afternoon. You sent a detailed quote on Monday, the customer seemed keen on the phone, and now nothing. It is tempting to read the silence as a no, but usually something duller is going on.

The quote is buried under forty other emails. They need to check with a partner or a finance person. They have a question about one line item, or they are waiting for a third quote before deciding.

Most businesses send one “just checking in” and give up, which hands the job to whichever competitor kept in touch. As long as each message is useful and the customer can end the conversation with one word, following up doesn’t count as pestering.

The schedule at a glance

When Message Purpose
Same day as the quote 1. Quote sent Confirm it arrived, invite questions
2 to 3 days later 2. Quick check Catch questions before they turn into doubts
About 1 week later 3. Something useful Add value, answer the usual objections
About 3 weeks later 4. Close it out? Get a clear answer, including “not now”
Every 2 to 3 months 5. Long-term check-in Stay in mind for when the timing is right

Adjust the gaps to your sales cycle. A plumber quoting a water heater replacement might compress this into a week. A firm quoting a six-month project might stretch it over two months. The order stays the same.

Templates 6 to 9 answer specific replies, so send them whenever that reply comes in rather than on a schedule.

Replace anything in square brackets. Keep the wording close to how you speak on the phone.

1. The same-day “quote sent” message

Send this right after the quote goes out, even if the quoting tool already sent its own automatic email. That system email looks like a receipt, while this one reads like it came from a person.

Email

Subject: Your quote for [job or product]

Hi [first name],

Your quote for [job or product] is attached. The short version: [one-line summary, such as “two options, with the main difference being the warranty length”].

If anything looks unclear or you want to change the scope, just reply here and I’ll adjust it. Happy to talk it through on a call too.

[Your name] [Phone number]

Text

Hi [first name], it’s [your name] at [company]. I’ve just emailed your quote for [job]. Any questions at all, reply here.

Why it works: the one-line summary means they understand the quote even if they never open the PDF, and it makes replying feel like the normal next step.

2. The two-to-three-day check

This is the follow up that catches the question they did not want to ask. Ask one specific thing rather than “any update?”

Email

Subject: Re: Your quote for [job or product]

Hi [first name],

Did the quote answer everything? People often ask about [common question, such as lead time or what’s included in installation], so in case it helps: [short answer].

If you’re comparing a few quotes, I’m glad to walk through ours line by line.

[Your name]

Text

Hi [first name], did the quote make sense? Most people ask about [common question] at this point, happy to explain.

Why it works: replying in the same thread keeps the quote one click away. Naming a common question gives them permission to ask theirs.

3. The one-week “something useful” message

By now a plain reminder adds nothing. Send something that helps them decide, even if they decide against you.

Email

Subject: A few things that might help with [job]

Hi [first name],

While you’re weighing things up, here are the questions customers usually have at this stage:

  • How soon can you start? Right now our lead time is about [timeframe].
  • What if [common concern]? [Your honest answer, such as your warranty or what happens if the scope changes.]
  • Can I see similar work? [Link or attachment: photos, a sample, a reference you have permission to share.]

If the timing or budget has changed, tell me and I can suggest a smaller first step.

[Your name]

Text

Hi [first name], I’ve emailed a few answers to the questions people usually ask about [job]. No rush, just in case it helps.

Why it works: it handles objections without making them say the objection out loud, and the offer of a smaller first step keeps a tight budget from ending the conversation.

4. After no response: the “should I close this out?” message

This is the most useful message in the sequence. It feels risky to send, but it usually gets more replies than anything before it, because it asks for a decision the customer can make in five seconds.

Email

Subject: Should I close your quote?

Hi [first name],

I haven’t heard back about the [job] quote, which usually means the timing isn’t right or you’ve gone another way. Both are completely fine.

Could you let me know which it is? Just reply with one of these:

  1. Still interested, need more time
  2. Went with someone else
  3. Not going ahead for now

If I don’t hear back, I’ll close it on my side and check in again in a few months.

[Your name]

Text

Hi [first name], should I keep your [job] quote open, or close it for now? Totally fine either way, a one-word reply is plenty.

Why it works: it makes “not yet” and “no” easy and polite to say. A clear no is worth more than silence because it frees your time, and “went with someone else” gives you a chance to ask, gently, what tipped it.

5. The long-term check-in

For anyone who said “not now,” or who never replied, a light check every two or three months keeps you in mind without nagging.

Email

Subject: Still thinking about [job]?

Hi [first name],

We spoke in [month] about [job]. I wanted to check in in case the timing has changed.

Since then, [one real update: a new option, a shorter lead time, a similar project you finished]. If it would help, I can refresh the quote with current pricing.

If it’s no longer on your list, just say so and I’ll stop checking in.

[Your name]

Text

Hi [first name], it’s [your name] from [company]. Checking in on the [job] we quoted in [month]. Want me to refresh the quote, or leave it for now?

Why it works: you say plainly why you are writing and give them a reason to reply, along with a clean way out.

Templates for specific situations

The sequence above is for silence. The next four are for the answers customers give you, and each one responds to what they said instead of restarting the schedule.

6. After a price objection

Email

Subject: Re: Your quote for [job or product]

Hi [first name],

Thanks for being straight with me about the price. That helps.

A few ways we could bring it down:

  • [A smaller scope, such as doing the first phase now and the rest later]
  • [A different material, model or finish]
  • [Spreading the payments, if you offer that]

And if another quote came in lower, I’m happy to look at it with you and show where the two differ. Sometimes the gap is fair and sometimes it isn’t.

[Your name]

Text

Hi [first name], thanks for telling me about the budget. I can put together a smaller option for [job]. Want me to send it over?

Why it works: it treats the objection as information rather than a no, and it offers choices instead of an automatic discount. Avoid cutting the price on the same scope unless your first number really was too high. Customers learn quickly when the first price is not the real one.

7. After “let me think about it”

Email

Subject: Re: Your quote for [job or product]

Hi [first name],

No rush at all. When people want to think a quote over, it usually comes down to the price, the timing, or a question about [common detail] they haven’t asked yet.

If it’s one of those, tell me which and I’ll help where I can. Otherwise I’ll check back on [day].

[Your name]

Text

Hi [first name], take your time. If something in the quote is holding you back, tell me and I’ll sort it out. I’ll check in on [day].

Why it works: naming the likely reasons makes it easy to reply with one of them, and naming the day you will check in means your next message is expected rather than a surprise.

8. When the customer is comparing quotes

Email

Subject: Comparing quotes for [job]?

Hi [first name],

If you’re looking at a few quotes for [job], here are three things worth checking on each one, ours included:

  1. What is included, especially [item that is often left out, such as disposal, permits or cleanup].
  2. How long the warranty lasts and what it covers.
  3. Who does the work, and when they can start.

Quotes that look far apart on price are often much closer once those line up. I’m glad to go through any of them with you.

[Your name]

Text

Hi [first name], if you’re comparing quotes for [job], check what each one includes for [item]. Happy to walk through ours line by line.

Why it works: you become the helpful voice in the comparison instead of the pushy one, and the checklist points at what you do well without you saying it. Only list things your quote really includes.

9. Before a quote expires

Email

Subject: Your [job] quote is valid until [date]

Hi [first name],

A quick heads up: the pricing in your [job] quote is valid until [date]. After that I’d need to recheck [material costs or our schedule] before confirming it.

If you need more time, tell me and I’ll see what I can do. If you’ve decided not to go ahead, that’s fine too. Just let me know.

[Your name]

Text

Hi [first name], your [job] quote is good until [date]. Want me to hold it, or update it later?

Why it works: a real deadline helps people decide. Only send this if the date is real. An expiry you never enforce makes every later quote harder to believe.

Quote follow up email subject lines

The subject lines that get opened look like they came from someone who knows the customer. Keep the job name in them, so the email is easy to find when they go looking for it later.

  • Your quote for [job]
  • Re: Your quote for [job] (reply in the same thread)
  • Quick question about your [job] quote
  • A few answers about [job]
  • A smaller option for [job]
  • Comparing quotes for [job]?
  • Should I close your quote?
  • Your [job] quote is valid until [date]
  • Still thinking about [job]?

Skip “Just checking in”, “Following up”, anything in capital letters, and anything that sounds like a newsletter. They read as automated before the email is even opened.

Tone rules that matter more than the template

Write the way you would talk to the customer. “Dear valued customer, we are following up regarding your recent quotation” gets skimmed and archived. Use first names and short sentences, and put your own name at the bottom.

Ask one question per message, so each follow up can be answered in a few words.

Skip the fake urgency. “This price expires Friday” only works if it is true. If prices really are changing, say so plainly and say why.

Make “not yet” easy to say. Every message above has an exit, and people who feel they can say no without awkwardness are far more likely to tell you the truth, including “yes, let’s go.”

Stop when they reply. Any reply, even “thanks, still deciding,” ends the automatic sequence, and from then on a person handles the conversation. Nothing feels more robotic than a “just checking in” email arriving the day after the customer answered.

How to automate your quote follow-up emails

You do not need to send these by hand. Most CRMs (HubSpot is a common example) and many quoting and job management tools can trigger a sequence when a quote is marked as sent. If yours cannot, a tool like Zapier, Make or n8n can watch for new quotes and send the messages for you.

To keep it from feeling automated:

  1. Pull in real details, like the job name, the quote amount or option, and the salesperson’s name. A template with only “[first name]” filled in reads like a mailing list.
  2. Send from a real inbox. Messages should come from the person who wrote the quote rather than a no-reply address, so replies land with them.
  3. Set stop conditions. The sequence should end when the customer replies, accepts the quote, declines it, or books a call. Test this with your own email address before going live.
  4. Send at human times: weekday business hours, not 2:13 a.m.
  5. Notify a person on every reply. The automation does the remembering, and a human does the talking.
  6. Keep message 4 personal. If the quote is large, have the salesperson glance at it before it goes, or send it themselves.

If quotes are slow to go out because someone retypes requests from email first, fix that too. Our guide to automating order entry from email covers the same idea for incoming orders, and our sales and customer service solutions show where follow up fits in the wider sales process. Want this running in your CRM? Book a call.

When not to use a sequence

Write fresh messages for your biggest, most complex quotes, and skip the sequence for customers you speak to every week. Never text anyone who has not agreed to receive texts. In the US and many other countries, permission matters for business texting, so add a clear consent line to your forms.

The bottom line

When a quote goes quiet, the customer is usually waiting on an answer to a question, on another person, or on the right moment. Send a same-day note, a quick check, something useful, and a polite “should I close this?”, then check in every few months. When the customer does reply, answer what they actually said, whether that is the price, the timing or another quote. Keep each message short, make “not yet” easy to say, and stop the moment they reply.

If you would like help setting up a follow up sequence that runs on its own and hands every reply to a person, book a call.

Common questionsFrequently asked.

How long should I wait to follow up on a quote?

Send a short note the same day you send the quote, then follow up two to three days later. After that, one week later and again around three weeks later, before moving the customer to an occasional check-in.

How many times should I follow up on a quote before giving up?

Four or five touches over about a month is reasonable for most businesses, ending with a polite message asking whether to close the quote. After that, a check-in every few months is enough for customers who said the timing was wrong.

Should I follow up on a quote by text or email?

Use both if the customer has agreed to texts. Email suits detail, attachments and anything they may want to forward. Texts suit quick questions. Make sure you have permission before texting, and keep texts to two or three lines.

How do I follow up on a quote with no response?

After two or three unanswered follow ups, send a short message asking whether to keep the quote open or close it, with one-word answers to choose from. That is much easier to answer than another reminder, and a clear no frees up your time.

What is a good subject line for a quote follow up email?

Keep the job name in it and make it look like it came from a person, such as "Your quote for [job]" or "Should I close your quote?". Avoid "just checking in" and anything that reads like a newsletter.

Do these templates work for estimate follow up emails?

Yes. Quotes and estimates are followed up the same way. Swap the word, keep the timing, and make sure the estimate says clearly whether the final price can change.

Can I automate quote follow up emails?

Yes. Most CRMs and quoting tools can send a timed sequence after a quote goes out and stop it when the customer replies, accepts or declines. Write the messages in your own voice and have a person pick up every reply.

What would you like to improve?

A 30-minute video call with Kenneth about where work gets stuck. You don't need a technical brief.

Book a 30-minute call